Icom IC-7100 Basic Manual page 58

4
D-STAR INTRODUCTION
"MY" (Your own call sign) programming
Before starting D-STAR, the following steps are needed.
IMPORTANT!
STEP 1
(MY) to a gateway repeater.
You can store up to 6 "MY" call signs.
Example: Enter "JA3YUA" as your own call sign into the
MY call sign memory [MY1].
1. Display the My Call Sign Edit screen
Push (C) to enter the Set mode.
q
SET
Touch the "MY Call Sign" item of the "My Station" Set
w
mode.
My Station > MY Call Sign
• If the specified item is not displayed, touch [∫] or [√](D)
one or more times to select the page.
Touch the desired call sign memory for 1 second.
e
(Example: 1:)
Touch the "Edit" item.
r
• The "MY CALL SIGN (MYM)" screen appears.
The memory number, selected in the step e, is dis-
played.
(Example: MY1)
Entering your call sign (MY) into the transceiver.
You have completed the steps!!
STEP 2
The L, R, C or D in the instructions indicate the part of
the controller.
L: Left side, R: Right side, C: Center bottom
D: Display (Touch screen)
Continued on the next page
☞
4-2
Registering your call sign
Touch [√]
Touch
"My Station"
Touch
"MY Call Sign"
Touch the call
sign memory
for 1 second
(Example: 1:)
Touch
"Edit"