D Microphone Gain Adjustment - Icom IC-7100 Basic Manual

3
BASIC OPERATION
Basic transmit operation (Continued)
D Microphone gain adjustment
(Mode: SSB/AM/FM/DV)
Push (C) to open the MIC gain/RF power
q
MIC/RF PWR
adjustment display.
Push [PTT] to transmit.
w
• Speak into the microphone at your normal voice level.
Rotate [M-CH] (L) to adjust the MIC gain.
e
When the MIC gain is adjusted too high, your
transmitted voice may be distorted.
Release [PTT] to receive.
r
Push (C) to close the display.
t
MENU
❍ In the SSB mode:
Touch the TX meter to select the ALC meter. Then,
while speaking into the microphone, rotate [M-CH]
(L) so that the ALC meter reading stays within
the ALC zone.
❍ In the AM, FM and DV modes:
While speaking into the microphone, rotate
[M-CH] (L) with another station listening to your
voice for clarity.
[M-CH]
MENU
MIC/RF PWR
ALC zone
3-24
TX/RX LED
MIC gain adjustment
When ALC meter
is selected.