Icom IC-7100 Basic Manual page 52

3
BASIC OPERATION
Voice synthesizer operation
The IC-7100 has a built-in voice synthesizer to an-
nounce the operating frequency, mode and S-meter
level in a clear, electronically-generated voice, in Eng-
lish or Japanese.
First, select the desired parameters to be announced in
the "Speech" Set mode. (p. 6-4)
Initial values for the voice synthesizer parameters
• RX Call Sign SPEECH:
• RX>CS SPEECH:
• S-Level SPEECH:
• MODE SPEECH:
• SPEECH Language:
• Alphabet:
• SPEECH Speed:
• SPEECH Level:
• [SPEECH/LOCK] Switch: SPEECH/LOCK*
*
See NOTE as described below.
Push [SPEECH/LOCK] to announce the currently
➥
selected frequency, mode and S-meter level*.
* The S-meter level announcement can be turned OFF. (p.
6-4)
NOTE: If "SPEECH/LOCK" is not selected in the
"[SPEECH/LOCK] Switch" item of the "Function"
Set mode, you should hold down
1 second to activate the voice synthesizer.
Push a mode switch to announce the appropriate
➥
mode, when the "MODE SPEECH" item is set to
"ON" in the "SPEECH" Set mode. (p. 6-4)
SPEECH > MODE SPEECH
(C) >
SET
ON (Kerchunk)
ON
ON
OFF
English
Normal
Fast
50%
(R) for
SPEECH
L eft D isplay
C enter
3-20
The L, R, C or D in the in-
R ight
structions indicate the part
of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
SPEECH