Fisher & Paykel OB60 Installation Instructions And User Manual page 30

Care and cleaning
28
Removing and refitting the sliding shelf supports (some models only)
Important!
Remove the side racks first to make removing the sliding shelf supports easier.
When refitting the sliding shelf supports, make sure that you fit
the side racks first
the slides to the top wire of a shelf position. They do not fit on the lower wire
both sides of each pair of slides
both slides on the same level.
Notes:
In some full ovens, you cannot fit the slides to the topmost shelf position.
In a compact oven, you can only fit the slides on the wire immediately below the side rack fixing
screws.
Clip on
1
Unclip
2
1
Fig.22 Removing the sliding shelf supports Fig.23 Refitting the sliding shelf
supports - full oven cavity