Fisher & Paykel OB60 Installation Instructions And User Manual page 28

Care and cleaning
26
What?
Side catalytic
panels
(not supplied with
all models)
Sliding shelf
supports (not
supplied with all
models)
Fat filter
(not supplied with
all models)
Rubber seal framing
the oven cavity
Knobs
How?
Either remove the side racks and
reverse the panels or heat the oven
o
at 250 C on for 60-90 minutes
and they will self-clean.
Wipe with a damp cloth and mild
detergent. Do not wipe off or wash
away the white lubricating grease
(visible when the slides are
extended).
If lightly soiled: wash in
dishwasher (normal cycle).
If heavily soiled:
1 Place under water in a pan.
2 Add two tablespoons of clothes
washing powder.
3 Bring to the boil.
4 Leave to soak for 30 minutes.
5 Rinse in clean water and dry.
Wipe very gently with a damp cloth
and mild detergent.
1 Wipe with a damp cloth and
mild detergent.
2 Dry thoroughly with a soft cloth.
Important!
These panels absorb and eliminate
greasy splashes at high-temperature
cooking. They do not normally require
cleaning. Clean only if they remain
dirty after you have cooked very fatty
foods.
Do not wash these in the dishwasher,
immerse in soapy water, or use oven
cleaner on them as doing so will
remove the white lubricating grease
and prevent the slides from running
smoothly.
Clean after every use. If the filter is not
cleaned, the grease build-up will block
and shorten the life of the fan element.
Take care not to unhook and
displace the rubber seal while
cleaning it.
Take care not to spray any oven
cleaner or other caustic cleaner on
the rubber seal, as doing so may
damage the rubber.
Do not use stainless steel or oven
cleaner on the knobs, as doing so may
damage their coating.