Microsoft Windows Nt Or Windows 2000 Client Or Server Installation Instructions; Run Setup; Follow On-Screen Instructions For Windows - HP P3410A - NetRAID 1M RAID Controller Installation And Configuration Manual

Chapter 9
Microsoft Windows NT or Windows 2000 Client or
Server Installation Instructions
For each client or server operating under Microsoft Windows NT or Windows
2000, or for each client running under Windows 95/98 or Windows 2000, run
Setup and then follow the on-screen instructions to install the appropriate
utilities.
All Windows NT, Windows 2000, and Windows 95/98 clients and servers should
be running the same versions of the HP NetRAID utilities supplied on the current
HP Netserver Navigator CD-ROM. If they are not running the same versions,
some clients and servers may not be able to communicate with each other.

Run Setup

To run the Setup program, follow the steps listed below either for Microsoft
Windows NT 4.0, Windows 2000, and Windows 95/98, or for Microsoft
Windows NT 3.51:
Microsoft Windows NT 4.0,
Windows 2000, and
Step Windows 95/98
1.
Select Start from the taskbar. Then
choose Run from the Start menu.
2.
Insert Diskette 1 of "NetRAID
Software—NT/Win2000."
3. Type <d>:\setup at the Open
prompt, where <d> is the drive letter
of the diskette drive you are using.
4. Go to Step 5.

Follow On-screen Instructions for Windows

5. On the User Information screen, type the user name and the company.
6. For Windows 95/98, go to Step 7.
For Windows NT or Windows 2000 on the Select Installation Options
window, select one of the following options:
114
Managing Servers Over the Network
Microsoft Windows NT 3.51
Select File/Run from the Program
Manager.
Insert Diskette 1 of "NetRAID
Software—NT/Win2000."
Type <d>:\setup at the Run prompt
and click OK, where <d> is the drive
letter of the diskette drive you are
using.
Go to Step 5.