Performing Soft System Resets (Resets 3, 4, And 5) - Extron electronics 6400s User Manual

Performing soft system resets (resets 3, 4, and 5)

Perform a soft reset of the switcher as follows:
1. Use an Extron Tweeker or other small screwdriver to press and hold the rear
panel Reset button until the rear panel Reset LED and the front panel View
and Esc buttons blink once (events reset), twice (system reset), or three times
(absolute reset).
Press and hold
the Reset button.
Events
Reset
RESET
Press and hold
the Reset button.
IP Settings
Reset
RESET
Press and hold
the Reset button.
Absolute
Reset
RESET
2. Release the Reset button and then immediately press and release the Reset
button again. Nothing happens if the second momentary press does not occur
within 1 second.
Reset LED flashes once.
3 seconds
View and Esc buttons flash once.
CONTROL
T ESC
VIEW
Reset LED flashes twice.
6 seconds
View and Esc buttons flash twice.
CONTROL
T ESC
VIEW
Reset LED flashes
three times.
9 seconds
View and Esc buttons flash three times.
CONTROL
T ESC
VIEW
Fiber Matrix 6400 Switcher • Operation
Release, then immediately
press and release again.
Release, then immediately
press and release again.
Release, then immediately
press and release again.
3-29