Requirements; Introduction; Hardware Requirements - Avaya
4600 Series Administrator's Manual

Requirements

P r o g r a m

Introduction

The 4600 Series IP Telephones use Internet Protocol (IP) technology with Ethernet line interfaces.
The IP telephones supplement the existing Avaya IP Solutions platform. This feature provides the
user with the capability to natively administer and maintain the new 4600 Series IP Telephones.
The 4600 Series IP Telephones provide support for DHCP and TFTP over IPv4/UDP which
enhance the administration and servicing of the phones. These phones use DHCP to obtain
dynamic IP addresses and TFTP to download new versions of software for the phones.
The 4600 Series IP Telephones provide the ability to have one connection on the desktop for both
the telephone set and the PC using the telephone's built-in hub.

Hardware Requirements

Before plugging in the 4600 Series IP Telephone, verify that all of the following requirements have
been met. Failure to do so will prevent the telephone from working and may have a negative
impact on your network.
The following hardware is required for 4600 Series IP Telephones to work properly:
Switch software release
®
DEFINITY R8.4
®
DEFINITY R9.0
®
DEFINITY R9.5 or later
®
DEFINITY R10
Avaya Communication Manager
TM
Software 1.1 or later
Avaya Communication Manager
TM
Software 1.1 or later
3
3
3
Telephone model(s)
4612, 4624
4612,4624
4606, 4612, 4624
4630 or 4630SW
4620
4602 or 4602SW
Telephone software release
R1.0
R1.1
R1.5 or later
R1.60 or later
R1.70 or later
R1.61 or later
Introduction
3
3-1