Invoking The Console Monitor - Nortel 5399 Hardware Installation Manual

Chapter 2 Installing the Model 5399 Remote Access Concentrator Module

Invoking the Console Monitor

Nortel Networks 5399 Access Switch Hardware Installation Guide
2-34
After the image boots, you can invoke the Console Monitor by
pressing on the service port terminal. The following prompt
Return
appears:
Console monitor:
At the Console Monitor prompt, entering help or ? displays the available
options:
• afd (displays the status of the Automatic Firmware
Download process - used only for the WAN interfaces).
• cli (starts the Command Line Interpreter on the current port)
• dump (from the Remote Access Concentrator to the host
and reboots).
• help or ? (displays the available options).
• info (displays configuration information for the Annex).
• leds (displays the current front panel LED status).
• quit (quits and returns to quiet console)
• reboot filename (reboots the Annex).
• rom (returns the Remote Access Concentrator to the ROM
Monitor).
• syslog (displays syslog messages).