Nortel 5399 Hardware Installation Manual page 84

Chapter 3 ROM Monitor Commands
Nortel Networks 5399 Access Switch Hardware Installation Guide
3-18
lat_key
The lat_key command allows you to set the LAT key from the ROM
monitor.
The lat_key is optional and may be purchased separately.
The command syntax is:
lat_key [–d]
The lat_key command display looks like this:
monitor:: lat_key
Enter LAT Key [<uninitialized>]::
The lat_key –d command displays the current LAT key setting:
monitor:: lat_key –d
LAT Key <uninitialized>::