Nortel 5399 Hardware Installation Manual page 53

ROM Software Rev: 1110
Board ID: 64
CPU Type: 486DX2
Memory size: 8 Meg
Flash size: 2 Meg
WAN 1: PRI E1 ETSI
WAN 2: PRI E1 ETSI
SLC 1
SLC SRAM Size: 128 K
SLC 2
SLC SRAM Size: 128 K
Hub Slot Hub CMB HW Rev
9 01
Nortel Networks 5399 Access Switch Hardware Installation Guide
Chapter 2 Installing the Model 5399 Remote Access Concentrator Module
13. Press y.
The Module Information menu is displayed.
14. Press twice.
Escape
The Slot Selection menu is displayed.
15. Press c and the slot number.
16. Verify the Remote Access Concentrator hardware
configuration by typing config and pressing
monitor prompt.
The screen display looks similar to this:
REVISION/CONFIGURATION INFORMATION
Board Type: 5399
Ethernet Address: 00-80-2d-xx-xx-xx
EEPROM size: 65504
Flash ID:0089
Revision: VERSION A MGR=1.159
Revision: VERSION A MGR=1.159
Modem Count: 31
Modem Count: 31
Hub EE Rev Hub EE Seg Sel
0.0
Modem Rev: 0
Modem Rev: 0
Hub Jmpr Seg Sel
N/A 00
at the
Return
2-21