Nortel 5399 Hardware Installation Manual page 15

This guide describes how to install a Nortel Networks 5399 Access Switch in a
Nortel Networks System 5000 chassis.
Note: The Access Switch product name appears only on the title page.
Whenever the term Remote Access Concentrator (RAC) appears in this
document, it refers to the Nortel Networks 5399 or 8000 Access Switch.
Before You Begin
This guide includes the following chapters and appendices:
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Appendix A Port Pins and Signals
308679-A Rev. 00
Introduction
Contains an overview of the Model 5399 Remote Access
Concentrator Module, and describes the hardware features and
firmware functions.
Installing the Model 5399 Remote Access Concentrator Module
Describes how to install the Model 5399 in a System 5000 chassis
and how to confirm its operating status.
ROM Monitor Commands
Describes the ROM Monitor commands that modify specific
configuration parameters, perform diagnostic tests, and load the
operational code.
Troubleshooting Procedures
Provides troubleshooting and verification procedures.
Details the port connectors located on the Model 5399 Remote
Access Concentrator.
Preface
xv