Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 33 Network Setting > Routing >Policy Route
LABEL
Add new Policy
Route Rule
#
Status
Name
Source IP
Source Mask
Source MAC
Protocol
Source
Interface
Source Port
WAN Interface
Modify
9.4.1 Add/Edit Policy Route
Click Add new Policy Route Rule in the Policy Route screen or click the Edit icon next to a
policy. Use this screen to configure the required information for a policy route.
Figure 54 Policy Route: Add/Edit
The following table describes the labels in this screen.
Table 34 Policy Route: Add/Edit (Sheet 1 of 2)
LABEL
Active
Route Name
Source IP
VMG5313-B10A/-B30A Series User's Guide
DESCRIPTION
Click this to create a new policy route rule.
This is the index number of the entry.
This field displays whether the policy route is active or not. A yellow bulb signifies that this
route is active. A gray bulb signifies that this route is not active.
This is the name of the policy route rule.
This is the source IP address.
This is the source subnet mask address.
This is the source MAC address
This is the transport layer protocol.
This is the source interface through which the traffic is routed.
This is the source port number.
This is the WAN interface through which the traffic is routed.
Click the Edit icon to edit this policy.
Click the Delete icon to remove a policy from the VMG. A window displays asking you to
confirm that you want to delete the policy.
DESCRIPTION
Click the checkbox to activate this Policy route.
Enter a descriptive name of up to 8 printable English keyboard characters, not including
spaces.
Enter the source IP address.
Chapter 9 Routing
135
Advertisement
Table of Contents
