Table of Contents
Advertisement
Table 3 Navigation Panel Summary (continued)
LINK
Wireless
Home
Networking
Routing
QoS
NAT
DDNS
Interface
Grouping
USB Service
Security Settings
VMG5313-B10A/-B30A Series User's Guide
TAB
FUNCTION
General
Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
Guest/More AP
Use this screen to configure multiple BSSs on the VMG.
WPS
Use this screen to configure and view your WPS (Wi-Fi Protected
Setup) settings.
WMM
Use this screen to enable or disable Wi-Fi MultiMedia (WMM).
Others
Use this screen to configure advanced wireless settings.
Channel Status
Use this screen to scan wireless LAN channel noises and view the
results.
LAN Setup
Use this screen to configure LAN TCP/IP settings, and other advanced
properties.
Static DHCP
Use this screen to assign specific IP addresses to individual MAC
addresses.
UPnP
Use this screen to turn UPnP and UPnP NAT-T on or off.
STB Vendor ID
Use this screen to have the Device automatically create static DHCP
entries for Set Top Box (STB) devices when they request IP
addresses.
IP Alias
Use this screen to allow LAN clients from different subnets to connect
to this device and share the routing functions.
UPnP List
Use this screen to enable the UPnP function.
Static Route
Use this screen to view and set up static routes on the VMG.
DNS Route
Use this screen to forward DNS queries for certain domain names
through a specific WAN interface to its DNS server(s).
Policy Route
Use this screen to configure policy routing on the VMG.
RIP
Use this screen to configure Routing Information Protocol to
exchange routing information with other routers.
General
Use this screen to enable QoS and traffic prioritizing. You can also
configure the QoS rules and actions.
Queue
Use this screen to configure QoS queues.
Classification
Use this screen to define a classifier.
Shaper
Use this screen to limit outgoing traffic rate on the selected interface
Port Forwarding
Use this screen to make your local servers visible to the outside
world.
Port Triggering
Use this screen to change your VMG's port triggering settings.
DMZ
Use this screen to configure a default server which receives packets
from ports that are not specified in the Port Forwarding screen.
ALG
Use this screen to enable or disable SIP ALG.
Sessions
Use this screen to configure the maximum number of NAT sessions
each client host is allowed to have through the VMG.
Dynamic DNS
Use this screen to allow a static hostname alias for a dynamic IP
address.
Interface
Use this screen to map a port to a PVC or bridge group.
Grouping
File Sharing
Use this screen to enable file sharing via the VMG.
Chapter 2 The Web Configurator
27
Advertisement
Table of Contents
