Table of Contents
Advertisement
Chapter 10 Quality of Service (QoS)
Table 40 Add New Classification (continued)
LABEL
OK
Cancel
10.6 The QOS Shaper Screen
This screen shows that you can use the token bucket algorithm to allow a certain amount of large
bursts while keeping a limit at the average rate.
Figure 61 Network Setting > QoS >Shaper (Newly added)
The following table describes the labels in this screen.
Table 41 Network Setting > QoS >Shaper
LABEL
#
Status
Outgoing Interface
Rate Limit (Kpbs)
Modify
10.6.1 Add New Shaper
Click Add new Shaper in the Shaper screen to show the following screen.
Figure 62 Network Setting > QoS >Shaper>Add New Shaper (Newly added)
148
DESCRIPTION
Click OK to save your changes.
Click Cancel to exit this screen without saving.
DESCRIPTION
This is the index number of the entry.
This field displays whether the shaper is enabled or not.
This shows the name of the VMG's interface through which traffic in this shaper
applies.
This shows the average rate limit of traffic bursts for this shaper.
Select this to edit an existing shaper.
VMG5313-B10A/-B30A Series User's Guide
Advertisement
Table of Contents
