Table of Contents
Advertisement
Table 1 LED Descriptions (continued)
LED
DSL
INTERNET
LAN
WiFi 2.4G
Phone1,
Phone2
USB
1.7 The RESET Button
If you forget your password or cannot access the Web Configurator, you will need to use the RESET
button at the back of the device to reload the factory-default configuration file. This means that you
will lose all configurations that you had previously and the default login names and passwords will
be reset (see the cover page).
Make sure the PWR/SYS LED is on (not blinking).
1
VMG5313-B10A/-B30A Series User's Guide
COLOR
STATUS
DESCRIPTION
Red
On
The VMG detected an error while self-testing, or there is a device
malfunction.
Off
The VMG is not receiving power.
Green
On
The ADSL line is up.
Blinking
The VMG is initializing the ADSL line.
Orange
On
The VDSL line is up.
Blinking
The VMG is initializing the VDSL line.
Off
The DSL line is down.
Green
On
The VMG has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by a DHCP
server), PPP negotiation was successfully completed (if used) and the
DSL connection is up.
Blinking
The VMG is sending or receiving IP traffic.
Off
There is no Internet connection or the gateway is in bridged mode.
Red
On
The VMG attempted to make an IP connection but failed. Possible
causes are no response from a DHCP server, no PPPoE response, PPPoE
authentication failed.
Green
On
The VMG has a successful 100 Mbps Ethernet connection with a device
on the Local Area Network (LAN).
Blinking
The VMG is sending or receiving data to/from the LAN at 100 Mbps.
Off
The VMG does not have an Ethernet connection with the LAN.
Green
On
The 2.4 GHz wireless network is activated.
Blinking
The VMG is communicating with other wireless clients.
Orange
Blinking
The VMG is setting up a WPS connection.
Off
The 2.4 GHz wireless network is not activated.
Green
On
A SIP account is registered for the phone port.
Blinking
A telephone connected to the phone port has its receiver off of the hook
or there is an incoming call.
Off
The phone port does not have a SIP account registered.
Green
On
The VMG recognizes a USB connection through the USB1 slot.
Blinking
The VMG is sending/receiving data to /from the USB device connected
to it.
Off
The VMG does not detect a USB connection through the USB1 slot.
Chapter 1 Introducing the VMG
21
Advertisement
Table of Contents
