Table of Contents
Advertisement
This tutorial uses the following example IP settings:
Table 4 IP Settings in this Tutorial
DEVICE / COMPUTER
The VMG's WAN
The VMG's LAN
IP Type
Use Interface
A
R's N1
R's N2
B
To configure a static route to route traffic from N1 to N2:
Log into the VMG's Web Configurator in advanced mode.
1
Click Network Setting > Routing.
2
Click Add new static route in the Static Route screen.
3
Configure the Static Route Setup screen using the following settings:
4
Select the Active check box. Enter the Route Name as R.
4a
Set IP Type to IPv4.
4b
Type 192.168.10.0 and subnet mask 255.255.255.0 for the destination, N2.
4c
Select Enable in the Use Gateway IP Address field. Type 192.168.1.253 (R's N1 address)
4d
in the Gateway IP Address field.
Select ADSL/atm0 as the Use Interface.
4e
VMG5313-B30A User's Guide
IP ADDRESS
172.16.1.1
192.168.1.1
IPv4
ADSL/atm0
192.168.1.34
192.168.1.253
192.168.10.2
192.168.10.33
Chapter 4 Tutorials
49
Advertisement
Table of Contents
