Table of Contents
Advertisement
Appendix B Setting up Your Computer's IP Address
• Select Built-in Ethernet from the Show list.
• Click the TCP/IP tab.
For dynamically assigned settings, select Using DHCP from the Configure list.
3
Figure 162 Macintosh OS X: Network
For statically assigned settings, do the following:
4
• From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your VMG in the Router address box.
Click Apply Now and close the window.
5
Turn on your VMG and restart your computer (if prompted).
6
Verifying Settings
Check your TCP/IP properties in the Network window.
298
VMG5313-B10A/-B30A Series User's Guide
Advertisement
Table of Contents
