Table of Contents
Advertisement
Chapter 13 Interface Grouping
In the following example, the client that sends packets with the DHCP Vendor ID option set to MSFT
5.0 (meaning it is a Windows 2000 DHCP client) is assigned the IP address 192.168.2.2 and uses
the WAN VDSL_PoE/ppp0.1 interface.
Figure 76 Interface Grouping Application
DHCP Vendor ID option: MSFT 5.0
Click Network Setting > Interface Group to open the following screen.
Figure 77 Network Setting > Interface Group
The following table describes the fields in this screen.
Table 55 Network Setting > Interface Group
LABEL
Add New
Interface Group
Group Name
WAN Interface
LAN Interfaces
Modify
13.2.1 Interface Group Configuration
Click the Add New Interface Group button in the Interface Group screen to open the following
screen. Use this screen to create a new interface group.
174
Default: ETH 2~4
192.168.1.x/24
192.168.2.x/24
DESCRIPTION
Click this button to create a new interface group.
This shows the descriptive name of the group.
This shows the WAN interfaces in the group.
This shows the LAN interfaces in the group.
Click the Delete icon to remove the group.
eth10.0
VDSL_PoE/ppp0.1
VMG5313-B10A/-B30A Series User's Guide
Internet
Advertisement
Table of Contents
