DataCard SR200 User Manual page 57

Reset
Scroll Right
Scroll Left
Speaker
Provides an electronic beep that indicates:
The speaker function can be turned on or off using the Status Monitor.
Using the Printer LCD Panel
Many printer settings can be changed using the Status Monitor. See
page
Menu Display Settings
Cleaning Rollers
MG Head
Counter Reset OK?
Test Print Test Pattern
Printer Setting
Network Setting
Lami Setting
SR200 & SR300 Printer and LM200 & LM300 Laminator User Guide
• An error has happened.
• Confirms that settings have been saved.
31. To use the menus:
• Press the Menu key when "Ready" is displayed to use the menus.
• Press the Menu key to display >Cleaning>, which is the first menu choice, on the
LCD panel.
• The > symbol following a menu selection indicates that there are subcategories
listed within the selection. Use the Next key to view these options.
• Press the Enter key when >Cleaning> is shown to view the Cleaning submenu.
Press the Next key in the Cleaning submenu to view cleaning choices.
• Press the Exit key at any time to exit that level of the menu system. Continue to
press Exit to "Ready" status.
Initializes the printer. Use the Reset key after
loading supplies, to end Power Saving, or after an
error occurs.
Move the cursor one position to the right.
Move the cursor one position to the left.
Function
Choose Rollers to start the cleaning function to clean the card
feed rollers and heated rollers. See
rollers and heat roller" on page 63
Choose MG Head to clean the magnetic (MG) head when
using magnetic stripe cards. See
head" on page 64
for the steps to follow.
Press Enter to reset the Free counter and Error counter.
Choose what type of sample card to print.
1 Press the Change key to enter the list of choices.
2 Press the Down Arrow key to scroll the list.
3 Press the Return key to print the chosen test pattern.
Test Print can be used with or without a host PC.
"Status Monitor" on
"Cleaning the card feed
.
"Cleaning the magnetic
51