Configure Your Apple Mac Printer Driver - Xerox Phaser 4622 System Administrator Manual

Configure your Apple Mac Printer Driver

Information Checklist
Before starting the Installation procedure, please ensure that the following items are available and/or
the tasks have been performed:
1. The Phaser 4622 printer driver should be installed on your Macintosh operating system.
Procedure
Configuration
1. Click on Printer Setup Utility on the Dock and go to step 6, or:
2. Double-click on the hard drive icon on the desktop.
3. Double-click on Applications.
4. Double-click on Utilities.
5. Double-click on Printer Setup Utility.
6. Select the printer and click on Show Info.
7. Click on Installable Options.
8. Select the options as installed on your device.
If you want to use the Save Job for Reprint feature, ensure Job Storage is set to Installed.
Note
9. Click on the Apply Changes button.
10. Click on the Close button.
Printing Preferences
1. Printing Preferences contains all the driver features, and enables you to set default settings for the
driver. You may save multiple sets of settings, and select the appropriate "Preset" at the time of
printing.
2. Open a document and select File, then Print. Select the printer, then select the Preset you want to
modify, or select Standard.
3. Options are available under the following dialogs:
• Copies & Pages - Specify which pages to print, and how many copies.
• Layout - Specify sides to print, page borders, pages per sheet (N-up).
• Output Options - Save as PDF or PostScript file.
• Scheduler - Print now, hold, or specify a time to print.
• Paper Handling - Print all pages, only odd pages, or only even pages. Reverse the page
order.
• Color Sync - Specify color conversion and quartz filters.
• Cover Page - Printed before or after the job, or no Cover Page.
• Error Handling - Standard or detailed report.
• Paper Feed - Specify which trays are used for which pages.
Printer Drivers
Phaser 4622
System Administrator Guide
61