Internet Printing Protocol (Ipp) Port - Xerox Phaser 4622 System Administrator Manual

Printer Drivers
10. Click on the OK button.
11. You will be prompted for a Printer Driver. Click on Have Disk.
12. Click on the Browse button.
13. Locate the Drivers folder on the CD and select the required Printer Driver file .inf.
14. Click on the Open button.
15. Click on the OK button.
16. Click on the Printer Model from the list.
17. Click on the Next button.
Note For Win Vista or later only, follow these steps to finish:
a. Click on Print a test page to verify that the printer is installed.
b. Click on Make this my default if required.
c. Click on the Finish button.
18. The Name your Printer screen appears.
19. Enter a Printer Name.
20. Click on the Next button.
21. The Printer Sharing Screen appears.
Note If you will be sharing this printer with other clients, then:
a. Select Share Name.
b. Enter a Share Name.
22. Click on the Next button.
23. Enter a Location name (and Comment if required.)
24. Click on the Next button.
25. Click on Yes to Print a Test Page.
26. Click on the Next button.
27. Click on the Next button.to close the Test Page window.
28. Click on the Finish button. The printer driver will install.
29. Verify that the test page is printed at the machine.

Internet Printing Protocol (IPP) Port

Internet Printing Protocol (IPP) is a TCP/IP protocol which enables the device to print via the Internet.
IPP Printing is enabled by default.
How to Enable the IPP Port
1. At your workstation, open the web browser and enter the TCP/IP address of the machine in the
Address bar.
2. Press Enter.
3. Click on the Properties tab.
4. Click on the Connectivity link.
5. Click on the Protocols link.
6. Select IPP in the directory tree.
46 Phaser 4622
System Administrator Guide