Xerox Phaser 4622 System Administrator Manual page 25

Hide thumbs Also See for Phaser 4622:
Table of Contents

Advertisement

DNSv6
11. Enter a valid IPv6 Domain Name.
12. Enter an IP address for the Primary DNSv6 Server Address. Enter an IP address for Secondary
DNSv6 Server Address.
13. Check the box to enable Dynamic DNSv6 Registration.
Note
If your DNS Server does not support dynamic updates there is no need to enable DDNS.
14. Scroll down the page and click on the Apply button to save the changes.
Test Access
1.
At your Workstation, open the Web browser, In the TCP/IP Address bar, enter "http://" followed by
the Internet address of the machine. Then press the Enter key on the keyboard.
Note
If you use the domain name to specify the machine, use the following format.
http://myhost.example.com
Note
If you use the IP address to specify the machine, use one of the following formats
depending on your machine configuration. The IPv6 format is supported on Windows Vista or
later only. An IPv6 address needs to be enclosed in square brackets.
IPv4: http://xxx.xxx.xxx.xxx
IPv6: http://[xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx]
Note
If you have changed the port number from the default port number "80", append the
number to the Internet address as follows. In the following examples, the port number is 8080.
Domain name: http://myhost.example.com:8080
IPv4: http://xxx.xxx.xxx.xxx:8080
IPv6: http://[xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx]:8080
2.
Verify that the home page of CentreWare Internet Services is displayed.
The CentreWare Internet Services installation process is now completed.
Note
If the Accounting feature is enabled, you may be required to enter a user ID and passcode
(if one is set up).
Note
When your access to CentreWare Internet Services is encrypted, enter "https://" followed by
the Internet address, instead of "http://".
Automatically Configured Gateway Address – Displays the automatically configured gateway
address.
Domain Name:
Domain Name – Displays the domain name.
DHCP/DDNS:
Release Registration – Allows DHCP resources to be released when the machine is powering
down. This is a display-only item and shows "Enabled".
Network Installation
Phaser 4622
System Administrator Guide
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents