Appletalk - Xerox Phaser 4622 System Administrator Manual

AppleTalk

Information Checklist
Before starting the installation procedure, please ensure that the following items are available and/or
the tasks have been performed:
Existing operational AppleTalk network.
1.
2. AppleTalk Name to assign to your printer.
3. AppleTalk Zone (if used) where your printer will reside.
Procedure
Setup AppleTalk via CentreWare Internet Services
1. At your Workstation, open the Web browser and enter the TCP/IP Address of the machine in the
Address bar.
2. Press Enter.
3. Click on the Properties tab.
4. Click on the Connectivity link.
Click on the Protocols link.
5.
6. Click on the AppleTalk link.
7. Check the Enable Checkbox.
8. Enter the Printer Name in the field.
9. Select an AppleTalk Zone from the drop down menu.
10. Click the Apply button to save the changes.
11. The Physical Connection and Printer Type fields are populated automatically.
Enable AppleTalk at the machine
1. Press the Menu button on the machine and select Tools.
2. Enter the Administrator's Password. The default is 1111 and press the OK button
3. Select Setup and press the OK button.
4. Select Network Settings and press the OK button.
5. Select AppleTalk and press the OK button.
6. Select On and press the OK button.
7. Press the Menu button to exit the Tools menu.
Network Installation
Phaser 4622
System Administrator Guide
25