Xerox Phaser 4622 System Administrator Manual page 55

4. Select Local Printer attached to this computer.
Note If already selected, click on Automatically detect and install my Plug and Play printer to
deselect it.
5. Click on the Next button.
Click on Create a new port.
6.
7. Click on Standard TCP/IP Port from the Type of Port pull down menu, and click on the Next
button.
8. Follow the relevant steps for your configuration:
Note Windows XP
a. The Add Standard TCP/IP Printer Port wizard opens
b. Click on the Next button.
c. Enter the Printer Name or IP Address of the printer.
d. Enter a name for the print queue in the Port Name box (or accept the default).
e. Click on the Next button.
f. Ensure 9100 appears as the Port Number and click on the OK button.
g. Click on the Finish button.
Note Windows 2003
h. Select TCP/IP Printer from the Device Type drop down menu.
i. Enter the Printer Name or IP Address of the printer.
j. Enter a name for the print queue in the Port Name box (or accept the default) and click on
the OK button.
Click on the Next button.
k.
l. Uncheck the box Query.
m. Click on Settings.
n. Click on Raw.
o. Ensure 9100 appears as the Port Number and click on the OK button.
p. Click on the Next button.
q. Click on the Finish button.
9. You will return to the Add Printer Wizard window and be prompted for a Printer Driver.
10. Load the Print Drivers CD into the CD drive. If the CD autoruns, click Exit.
11. Click on the Have Disk button.
12. Click on the Browse button.
13. Locate the Drivers folder on the CD and click on the required driver from the list.
14. Click on the Open button.
15. Click on the OK button.
16. Select the model of your machine from the list.
17. Click on the Next button.
18. Enter Printer Name (or accept the default name).
19. Click on the Next button.
20. If you want this to be your default printer, click on Yes.
Printer Drivers
Phaser 4622
System Administrator Guide
49