Snmpv3 - Xerox Phaser 4622 System Administrator Manual

SNMPv3

SNMPv3 can be enabled to create an encrypted channel for secure machine management.
1. At your Workstation, open the web browser, enter the TCP/IP Address of the machine in the
Address bar.
2. Press Enter.
3. Click on the Properties tab.
Click on the Connectivity link.
4.
5. Click on the Protocols link.
6. Click on the SNMPv3 link.
7. Click the Enable checkbox.
8. Enter the Username.
9. Enter the Authentication Password.
10. Select the Algorithm type.
11. Enter the Privacy Password.
12. Click on the Apply button to accept the changes.
If prompted, enter the Administrator's User ID admin and Password 1111, and click on Login.
Data Encryption ensures that any user or job sensitive data that resides on the machine is secure. Data
Encryption is automatically enabled on the machine and no further configuration is required by the
administrator. If the hard drive is removed from the network controller, then the encrypted data
remains protected because the encryption key is not stored on the hard drive.
Phaser 4622
System Administrator Guide
Security
97