Change The Administrator Password - Xerox Phaser 4622 System Administrator Manual

Machine Connection
6. The Keep Alive Timeout setting determines how long the machine's Internet Services pages will
wait for a response from a connected user before terminating the connection. Enter the required
number of seconds (1 - 60) in the Keep Alive Timeout entry box.
Note Generally, a user being connected to the machine using Internet Services for an extended
period will slow down and tie up connections. Keep Alive Timeout controls the number of seconds
that connections remain open from the HTTP server side without any requests from the client
reaching the server.
The Maximum Connections setting is the maximum number of simultaneous connections that
7.
are allowed to Internet Services at any one time. In the Maximum Connections entry box, enter a
number from 8 - 32 to indicate the maximum number of clients that can be connected (for
example, with open sockets) to the HTTP server.
8. Change the HTTP Port Number if required. The default is 80.
9. Select the Require SSL option as the HTTP Security Mode.
Note The machine must have a Machine Digital Certificate configured to enable Secure HTTP -
see Machine Digital Certificate Management & Trusted Certificate Authorities on page 91.
10. Click on the Apply button to accept the changes.
11. Click on the OK button when the confirmation message box appears.

Change the Administrator Password

It is recommended that you change the default administrator password to a more secure password, so
this Xerox machine is not compromised.
To change the admin password:
1. At your Workstation, open your web browser and enter the TCP/IP Address of the machine in the
Address bar.
2. Press Enter.
3. Click on the Properties tab.
Note If prompted, enter the Administrator's User Name admin and Password 1111, and click OK.
4. Click on the Security link.
5. Click on the Security Settings link.
6. Click on the Administrator Accounts tab.
7. Enter the new admin password in both the Password and Verify Password fields.
Note Do not forget the password or you could be completely locked out of the system, requiring a
Service call.
8. Click Apply.
If prompted, enter the Administrator's User ID admin and Password 1111 and click on Login.
9. Click on the OK button when the confirmation message box appears.
12 Phaser 4622
System Administrator Guide