Figure 33. Console Redirection Screen - Intel S1200V3RP Technical Product Specification

Intel® Server Board S1200V3RP TPS
Comments:
the System Information group of configuration settings.
Back to [Server Management Screen] — [Screen Map]
16. BMC LAN Configuration
Option Values:
Help Text:
View/Configure BMC LAN and user settings.
Comments:
the BMC LAN Configuration group of configuration settings.
Back to [Server Management Screen] — [Screen Map]
9.4.2.15 Console Redirection
The Console Redirection screen allows the user to enable or disable Console Redirection for
Remote System Management, and to configure the connection options for this feature.
To access this screen from the Main screen, select Server Management > Console Redirection.
To move to another screen, press the <Esc> key to return to the Server Management screen,
then select the desired screen.
When Console Redirection is active, all POST and Setup displays are in Text Mode. The Quiet
Boot setting is disregarded, and the Text Mode POST Diagnostic Screen will be displayed
regardless of the Quiet Boot setting. This is due to the limitations of Console Redirection, which
is based on data terminal emulation using a serial data interface to transfer character data.
Console Redirection can use either of the two Serial Ports provided by the SuperIO in the BMC.
However, if Console Redirection is to be coordinated with Serial Over LAN, the user should be
aware that SOL is only supported through Serial Port A.
Revision 1.2
Selection only. Select this line and press the <Enter> key to go to
<None>
Selection only. Select this line and press the <Enter> key to go to

Figure 33. Console Redirection Screen

BIOS Setup Interface
157