Hsbp_ I 2 C Header; Hdd Led Header; Chassis Intrusion Header; Sata Sgpio Header - Intel S1200V3RP Technical Product Specification

Intel® Server Board S1200V3RP TPS
8.3.5 HSBP_ I C Header
2
8.3.6

HDD LED Header

The server board includes a 2-pin hard drive activity LED header used with some SAS/SATA
controller add-in cards. The header has the following pin-out.
Pin
1
8.3.7

Chassis Intrusion Header

The server board includes a 2-pin chassis intrusion header which can be used when the chassis
is configured with a chassis intrusion switch. The header has the following pin-out.
Header State
Pins 1 and 2 closed
Pins 1 and 2 open
8.3.8

SATA SGPIO Header

SGPIO uses a 5pin header, this is to incorporate a ground conductor as an SI improvement
over previous generation products and based on measurement data indicating add the ground
is strongly recommended. The 5pin connector will be consistent with other HSBPs, in this way
cable commonality is improved.
Revision 1.2
Pin
6 FM_LCP_LEFT_N
7 FM_LCP_RIGHT_N
Table 34. HSBP_ I
Pin
1 SMB_HSBP_3V3STBY_DATA
2 GND
3 SMB_HSBP_3V3STBY_CLK

Table 35. HDD LED Header Pin-out (J1G2)

Signal Name
LED_HDD_ACT_N

Table 36. Chassis Intrusion Header Pin-out (J1F1)

FM_INTRUDER_HDR_N is pulled HIGH. Chassis cover is closed.
FM_INTRUDER_HDR_N is pulled LOW. Chassis cover is removed.

Table 37. SATA SGPIO Header Pin-out (J2K2)

Pin
1 SCLK
2 SLOAD
3 GND
4 SDATAOUT0
5 SDATAOUT1
On-board Connector/Header Overview
Signal Name
C Header Pin-out (J2K4)
2
Signal Name
Pin Signal Name
2 N/A
Description
Signal Name
79