Intel S1200V3RP Technical Product Specification page 178

BIOS Setup Interface Intel® Server Board S1200V3RP TPS
®
the Baseboard LAN configuration and the Intel RMM4 with Dedicated Server Management NIC
Module.
IP addresses for either IPv4 or IPv6 addressing can be assigned by static IP addresses
manually typed in, or by dynamic IP addresses supplied by a Dynamic Host Configuration
Protocol (DHCP) server. IPv6 addressing can also be provided by "stateless autoconfiguration"
which does not require a DHCP server.
The BMC LAN Configuration screen is unusual in that the LAN Configuration parameters are
maintained by the BMC itself, so this screen is just a User Interface to the BMC configuration.
As such, the initial values of the LAN options shown on the screen are acquired from the BMC
when this screen is initially accessed by a user,. Any values changed by the user are
communicated back to the BMC when a "Save Changes" or "Save Changes and Exit" action is
performed. If a "Discard Changes" or "Discard Changes and Exit" action is performed instead,
any accumulated changes from this screen will be disregarded and lost.
164 Revision 1.2