Emp Console In Redirect State; Emp Console Access Modes (Server Configured For Console Redirection) - Intel L440GX+ Product Manual

Figure 10 shows EMP Console window in redirect mode with the terminal window. The text that
appears on the server monitor displays in the Redirect window.
Availability of the various EMP Console features are determined by two factors: the BIOS
EMP access mode and if the server's COM2 port is configured for console redirection. The three
EMP access modes are disabled, pre-boot, and always active.
Table 6.

EMP Console Access Modes (Server configured for console redirection)

Mode Server is powered off
Disabled Redirect window appears,
but is blank
Pre-boot EMP commands available
Always Active EMP commands available
* The operation mode can be modified by selections in the Reset and Power on/off dialogs. These are server control dialogs
available in EMP Console.
64
Figure 10. EMP Console in Redirect State
During BIOS POST
Redirect window
Redirect window*
Redirect window*
After OS boots
Redirect window
Redirect window
EMP commands available
Configuration Software and Utilities