Table 21. Console Redirection Submenu - Intel SE7501BR2 - Server Board Motherboard Product Manual

Table 20. System Management Submenu (continued)
Boot Priority
BMC Device Revision
PIA Revision
SDR Revision
Primary HSBP Revision
Secondary HSBP
Revision
Table 21. Console Redirection Submenu
Feature
BIOS Redirection
Port
ACPI Redirection
Port
Baud Rate
Flow Control
Terminal Type
POST and the BIOS Setup Utility
Device Description
N/A Information only
N/A Information only
N/A Information only
N/A Information only, displaying the revision of the Hot-swap
backplane. This information is not available if the HSBP is not
detected.
N/A Information only, displaying the revision of the Hot-swap
backplane. This information is not available if the HSBP is not
detected.
Choices Description
Serial Port A When a serial port is selected, BIOS Console Redirection is
Serial Port B enabled and uses the I/O port specified. Enabling this option
Disabled disables Quiet Boot.
Serial Port A This option enables ACPI OS Headless Console Redirection.
Serial Port B
Disabled
9600 This specifies the baud rate to be used when console
19.2k
redirection is enabled. When the Emergency Management Port
38.4k shares the COM port for console redirection, the baud rate must
57.6K be set to 19.2k to match the baud rate for the Emergency
115.2k Management Port baud rate, unless the auto-baud feature is
used.
None, None disallows flow control.
CTS/RTS
CTS/RTS is hardware-based flow control.
XON/XOFF
XON/XOFF is software-based flow control.
CTS/RTS +CD
CTS/RTS +CD is hardware-based with carrier detection flow
control.
When the Emergency Management Port shares the COM port
for console redirection, the flow control must be set to CTS/RTS
or to CTS/RTS +CD, depending on whether a modem is used.
PC-ANSI This option selects the character set to send through the serial
VT100+ port when console redirection is enabled. VT-UTF8 uses
VT-UTF8 Unicode characters. VT100+ works only with English.
PC-ANSI is the standard PC-type terminal.
69