Restraint Cover - Diono RadianRXT Instruction Manual

Restraint Cover

Note: It is not necessary to remove
buckle tongs or chest clip from
harness straps when removing and
replacing restraint cover.
Removing restraint cover:
1. Unthread harness shoulder straps from back of restraint
(see page 36, adjusting
harness height).
2. Remove fasteners securing
cover to inside of restraint
bottom. (Fig. 1-A)
3. Unhook fasteners securing
cover to front of restraint.
(Fig. 1-B)
4. Carefully remove upper
portion of cover from
restraint taking care not to
damage the white EPS foam
panels, and then remove
cover from bottom portion
of the restraint.
Replacing restraint cover:
To replace the cover, follow cover removal instructions in
reverse order. Make sure harness shoulder straps are
threaded through correct slots and that harness straps are
not twisted. (See page 36, for changing harness height.)
1
1
40
Meijer.com
A
B