Diono RadianRXT Instruction Manual page 38

Harness Buckle Removal and
Installation
Removing harness buckle:
1. Make sure restraint is
securely locked in its unfold-
ed position. (See page 10,
unfolding restraint.)
2. Unbuckle harness.
3. Push harness buckle strap
down 2 inches into rear-
facing belt path tunnel.
4. Position metal buckle strap retainer so that it is vertical.
(Fig. 2)
5. Guide buckle strap and metal retainer upward and
rotate it slightly to fit through slot in the restraint
bottom. (See Fig. 1 on page 37.)
IMPORTANT:
For larger hands or if buckle is in position closest to child,
partially fold the restraint to access the metal retainer
through bottom of restraint. (Fig. 3)
3
(continued)
38
Meijer.com
2