Unfolding And Folding Restraint - Diono RadianRXT Instruction Manual

Unfolding and Folding Restraint

WARNING:
• Do NOT use restraint if release levers or locking bolts
bind or do not move freely. When release levers are
lifted, release levers and locking bolts should spring back
immediately.
• Do NOT oil or lubricate any part of restraint.
• ALWAYS confirm restraint is locked securely in its unfold-
ed position before each use.
• To avoid risk of injury, keep others at a safe distance
during folding and unfolding.
• Familiarize yourself with restraint unfolding and folding
operations prior to use.
• Foreign objects and debris can interfere with proper
operation of locking mechanism. Before installation,
confirm both locking bolt and release lever areas are free
of any debris (see page 44 for cleaning of mechanisms).
Unfolding Restraint
1. Place restraint on its
back on a flat surface
and unfasten red
carry strap from
restraint bottom.
(Fig. 1)
2. Firmly rotate
restraint bottom
until a 'click' confirms
restraint is locked in
open position.
(Fig. 2)
IMPORTANT:
Confirm release levers are completely recessed inside their
housings. (See page 3 diagram.) Confirm restraint is locked
in the open position. If not, repeat step 2.
1
2
10
Meijer.com