Aircraft Installation; Safe Stop - Diono RadianRXT Instruction Manual

Aircraft Installation

1
2
SafeStop
SafeStop is a load-limiting device designed to absorb
energy and reduce impact to a smaller, forward-facing
child. Store SafeStop with top tether on back of restraint.
WARNING:
• ALWAYS use SafeStop when
using LATCH or top tether with
forward- facing child under 40 lbs.
• Do not use SafeStop with any
other installation configuration.
• Do not use with rear-facing child.
Instructions:
1. Remove harness straps from
metal yoke of harness adjuster.
(Fig. 1)
2. Thread bottom of SafeStop
onto metal yoke of harness
adjuster. (Fig. 2)
3. Thread both harness straps
onto metal arm of SafeStop.
(Fig. 2)
This restraint is FAA certified for use
in an aircraft only as a harnessed
restraint. This restraint is NOT
certified for use in an aircraft as a
belt-positioning booster.
Rear-facing aircraft
installation (Fig. 1):
• Adjust seatbelt buckle to its
• Ask flight attendant for
• Follow remaining installation
Forward-facing aircraft
installation (Fig. 2):
• Follow installation instruc-
TM
shortest length to ensure
buckle is accessible for release.
'seatbelt extender, ' and then
use this extender to adjust
seatbelt length.
instructions on page 18.
tions on page 24.
1
2
28
Meijer.com