Folding Restraint - Diono RadianRXT Instruction Manual

3. Pull harness adjusting strap
until harness begins to
tighten. (Fig. 3) If strap
does not slide freely, fold
restraint, remove harness
adjusting strap from fold
joint and repeat step 3.
4. Fasten both fabric side
panels to center panel.
(Fig. 4)
5. Slide red carry strap into
bottom slot in center of
cover when not in use.
(Fig. 5)
1
A
2

Folding Restraint

1. Remove red carry strap
from behind cover and
unbuckle harness. Unfasten
both fabric side panels and
tuck them into the sides.
(Fig. 1)
2. Loosen harness: lift harness
adjuster while pulling the
harness straps all the way
forward. (Fig. 2)
3. Raise head support to its
A
top position (see page 32).
4. Adjust both armrests to
their inward position (Fig 2A)
(continued next page)
11
Meijer.com
3
4
5