Rear-Facing Lap Belt Installation (5 To 45 Lbs) - Diono RadianRXT Instruction Manual

Rear-Facing Lap-Belt Installation
for children 5 lbs – 45 lbs
WARNING:
• You must use restraint rear-facing if child is less than 1
year and weighs less than 20 lbs.
• Detachable base must be used with rear-facing restraint.
• Do NOT use SafeStop with rear-facing child.
Fig. 1 shows a typical rear-
facing installation with a lap
vehicle seat belt.
1. Confirm detachable base is
securely attached to restraint
bottom. (see page 13)
2. Place restraint in proper
rear-facing position:
Restraint bottom and base are both flat on the vehicle
seat with front of restraint against the back of that
vehicle seat. (Fig. 1)
Note: It may be necessary to move vehicle front seats
slightly forward to properly fit a rear-facing restraint.
3. Route seat belt through
rear-facing belt path. (Fig. 2)
Confirm seat belt lays flat
and is not twisted.
1
2
18
Meijer.com