Forward-Facing Lap Belt Installation (20 To 80 Lbs) - Diono RadianRXT Instruction Manual

Forward-Facing Lap-Belt
Installation
WARNING:
• Do NOT place infant in forward-facing restraint until
1 year and 20 lbs.
• For lap belt installation ONLY
use SafeStop with top tether
and with child under 40 lbs
(see page 28 and 30).
• Remove detachable base
when restraint is installed
forward-facing.
Fig. 1 shows a typical forward-
facing installation with a lap
vehicle seat belt. If forward-
facing recline is desired, adjust
it prior to installation (see
page 29).
1. Place restraint in forward-
facing position.
Stability of installation can
be improved by using top
tether shown in blue, Fig. 1
(see page 30 for top tether
instructions).
2. Route seat belt through
forward-facing belt path
and behind restraint cover
and buckle it. (Figs. 2 & 3)
Confirm seat belt lays flat
and is not twisted.
Installation Tip:
Unfasten fabric side panels and
reach behind restraint cover for
easy access to belt path. (Fig. 4)
for children 20 lbs – 80 lbs
24
Meijer.com
1
2
3
4