Removing Base - Diono RadianRXT Instruction Manual

Detachable Base
WARNING:
• Detachable base must be used
when restraint is rear-facing.
• Do NOT use detachable base
when restraint is forward-facing.
Installing base (Rear-facing only)
1. Confirm restraint is locked in its unfolded position
(see page 10).
2. Confirm adjustable bottom is
locked in its raised position
(see page 29).
3. Align posts with holes and
insert base into restraint
bottom. (Fig. 1)
4. Slide base back until it
reaches alignment mark on
restraint bottom and secures
into place. (Fig. 2)
5. Push down metal tab to lock
base. (Fig. 3)

Removing Base

1. Lift metal tab to unlock base.
(Fig. 3)
2. Slide base forward (the
opposite direction as shown
in Fig. 2).
3. Pull base away from restraint
bottom.
Tip: To carry detachable base,
fit it inside folded restraint.
(Fig. 4)
1
13
Meijer.com
2
3
4