Maintenance Protocol - Buderus Logano GA124 Installation And Maintenance Instructions Manual

Boiler inspection and maintenance

11.8 Maintenance protocol

Please check off the maintenance work as it is completed and record the measured values.
Follow the instructions on the following pages.
Maintenance work
1. Inspection of the flue system including
combustion air, inlet and outlet openings
2. Inspection of boiler
3. Inspection of burner
4. Cleaning boiler
5. Cleaning burner
6. Measuring gas supply pressure
7 Measuring manifold pressure
8. Checking for leaks in operating condition
9. Checking pilot and main burner flame
10: Check operation of venting fan.
11. Check maximum aquastat
12. Check the area around the boiler for flammable
materials, gasoline or other corrosive liquids.
13. Confirm maintenance
Confirmation of correct maintenance
(company stamp, signature)
We reserve the right to make any changes due to technical modifications.
Installation and maintenance instructions Logano GA124 special gas-fired boiler • Issue 04/2005
Page Date:
page 48
page 48
page 48
page 50
page 54
page 37
–––––––
page 41
–––––––
page 37
page 42
page 54
page 54
Date:
inches W. C. inches W. C.
–––––––
inches W. C. inches W. C.
–––––––
11
59