Maintenance Protocol - Buderus Logano G234X Installation And Service Instructions Manual

8.8

Maintenance protocol

Please check off the maintenance work as it is completed and record the
measured values.
Follow the instructions on the following pages.
Maintenance work
1. Inspection of the flue system including combustion
air, inlet and outlet openings
2. Gas manifold pressure
3. Inspection of burner
4. Cleaning of boiler
5. Cleaning of burner
6. Measuring gas supply pressure
7. Measuring orifice pressure
8. Checking for leaks in operating condition
9. Checking pilot burner flame
10. Checking main burner flame
11. Check the vent damper
12. Check high temperature limit control
13. Check the area around the boiler for flammable
materials, gasoline or corrosive liquids.
14. Confirm maintenance
Confirmation of correct maintenance
(company stamp, signature)
Table 13 Maintenance protocol
Date: Date:
____________inches W. C.
____________inches W. C.
Table 14 Maintenance protocol
Logano G234X – 6 720 804 886 (2012/08)
Date:
____________inches W. C. ____________inches W. C.
____________inches W. C. ____________inches W. C.
Boiler inspection and maintenance
Page Date:
page 23
page 23
page 13
page 23
page 24
page 26
page 18 ____________inches W. C. ____________inches W. C.
page 18 ____________inches W. C. ____________inches W. C.
page 17
page 24
page 18
page 18
page 21
page 18
Date:
____________inches W. C.
____________inches W. C.
8
Date:
Date:
____________inches W. C.
____________inches W. C.
29