Buderus Logano GA124 Installation And Maintenance Instructions Manual page 21

Boiler installation
Installing panel components
17. Swivel display unit to the desired position.
USER NOTE
We recommend positioning the display
unit straight on combinations with an
L-tank.
18. Position terminal cover and screw to control.
19. Slide tabs of rear boiler cover under the front boiler
cover and press down at back.
20. Screw rear boiler cover to rear panel of boiler.
SYSTEM DAMAGE
due to dirt.
If the boiler is assembled and not in use,
CAUTION!
note the following:
Protect the boiler connections from dirt
by closing the connections.
We reserve the right to make any changes due to technical modifications.
Installation and maintenance instructions Logano GA124 special gas-fired boiler • Issue 04/2005
Fig. 17 Swivel display unit
Fig. 18 Positioning terminal cover
Fig. 19 Installing rear boiler cover
7
21