Bpm Test (Alternate Method); Equipment Required; Setup; Figure 17: 200 Bpm - Nellcor OxiMax SRC-MAX Technical Manual

9. The period of the signal should be 0.27 to 0.33 seconds.
10. The pulse width of the signal should be 50 to 100

BPM Test (Alternate Method)

Equipment Required:

Setup

Tolerances for this procedure are in the Specifications section,
page 37.
1. Connect the SRC-MAX to the powered-up pulse
SRC-MAX

Figure 17: 200 BPM

milliseconds.
• Pulse oximeter or monitor
• ECG monitor
• Three lead ECG cable
oximeter or monitor. The SRC-MAX should power up
normally.
Performance Verification
29