Sselecting Custom Program - Horizon Fitness ELLIPTICAL RE7.6 Assembly & User's Manual

S E LE CTIN G C U S T O M P R O GR A M
1)
Select CUSTOM PROGRAM (P8) using the PROGRAM KEYS and press ENTER.
2)
Set TIME using the +/- KEYS and press ENTER.
• IF THE PROGRAM IS PREVIOUSLY STORED – After you set the time and press START the previously
stored program will begin.
)
Set the RESISTANCE PROFILES using the +/- KEYS and press ENTER after each RESISTANCE PROFILE
is set to the desired level (repeat until all 15 segments are chosen).
*NOTE: If START is pressed it will take you back to previous segment.
)
After the 15th segment is set, press ENTER to save the program then press START to begin the
program.
*NOTE: To reset the memory press and hold the ENTER button for 5 seconds.
21