Horizon Fitness ANDES 5 Owner's Manual
  1. Manuals
  2. Brands
  3. Horizon Fitness Manuals
  4. Elliptical Trainer
  5. ANDES 5
  6. Owner's manual

Horizon Fitness ANDES 5 Owner's Manual

Hide thumbs Also See for ANDES 5:
Table of Contents

Advertisement

Quick Links

See also: Operating Manual
ANDES 5 ANDES 7i
ELLIPTICAL OWNER'S MANUAL
Read the ELLIPTICAL gUIdE before using this OWNER'S MANUAL.

Advertisement

Table of Contents
loading

Related Manuals for Horizon Fitness ANDES 5

Summary of Contents for Horizon Fitness ANDES 5

  • Page 1 ANDES 5 ANDES 7i ELLIPTICAL OWNER’S MANUAL Read the ELLIPTICAL gUIdE before using this OWNER’S MANUAL.
  • Page 3 IMPORTANT PRECAUTIONS SAVE THESE INSTRUCTIONS Read this ELLIPTICAL gUIdE before using the OWNER’S MANUAL. When using an electrical product, basic precautions should always be followed, including the following: Read all instructions before using this elliptical. It is the responsibility of the owner to ensure that all users of this elliptical are adequately informed of all warnings and precautions.
  • Page 4 WARNING TO REDUCE THE RISk Of bURNS, fIRE, ElECTRICAl SHOCk OR INjURy TO pERSONS: • If you experience any kind of pain, including but not limited to chest pains, nausea, dizziness, or shortness of breath, stop exercising immediately and consult your physician before continuing. •...

  • Page 5: Grounding Instructions

    At NO time should children under the age of 13 be closer to the elliptical than 10 feet. At NO time should children under the age of 13 use the elliptical. Children over the age of 13 or disabled persons should not use the elliptical without adult supervision. It is essential that your elliptical is used only indoors, in a climate controlled room.
  • Page 7 ASSEMBLY WARNING There are several areas during the assembly process that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the elliptical could have frame parts that are not tightened and will seem loose and may cause irritating noises.
  • Page 8 CONSOlE HANDlEbAR SET pUlSE GRIpS ANDES 5 SHOWN bOTTlE HOlDER CONSOlE MAST MAIN fRAME CONSOlE MAST bOOT pOWER CORD SOCkET pEDAl ARM fOOTpAD STAbIlIZER TUbE TRANSpORT WHEEl GUIDE RAIl SET ROllER WHEEl COVER...

  • Page 9: Tools Included

    Unpack the product where you will be using it. Place the elliptical carton on a level flat surface. It is recommended that you place a protective covering on your floor. Never ANDES 5 pARTS bOX INClUDED: open box when it is on its side.
  • Page 10 SCREWS (b) from the MAIN fRAME (2). Carefully pull CONSOlE CAblE from the CONSOlE MAST (1) then attach to another ANDES 5 CONSOlE CAlbE on the MAIN fRAME (2). Attach CONSOlE MAST (1) to MAIN fRAME (2) using 4 pRE-INSTAllED WASHERS (A), 4...
  • Page 11 ASSEMBLY STEp 2 HARDWARE fOR pACkAGE 2 pART TypE DESCRIpTION RINg Φ16.0xΦ26.2x11.5T ANDES 5 WASHER Φ16.0xΦ25.0x1.5T WASHER Φ8.6xΦ26.0x2.0T SPRINg WASHER Φ8.2xΦ15.4x2.0T SCREW M8X1.25PX20L COVER Attach HANDlEbAR SET (3) onto CONSOlE MAST (1) using 1 RING (C), 2 WASHERS (D), 1 WASEHR (E), 1 SpRING WASHER (f) and 1 SCREW (G), 1 COVER (H).
  • Page 12 ASSEMBLY STEp 3 HARDWARE fOR pACkAGE 3 pART TypE DESCRIpTION SPRINg WASHER Φ8.2xΦ15.4x2.0T ANDES 5 SCREW M8X1.25PX70L-12L WASHER Φ8.2xΦ20.0x1.5T M8X1.25P Attach the pEDAl ARM (6) onto HANDlEbAR SET (3) with 1 SCREW (I), 1 WASHER (j), 1 SpRING WASHER (f) and 1 NUT (k).
  • Page 13 ANDES 5 ECB Magnetic Brake System Overall dimension: 1740 x 690 x 1750 mm / 66” x 27” x 69” Folding dimension: 1025 x 690 x 1750 mm / ANDES 5 40” x 27” x 69” Max. User Weight: 136 kg / 300 lbs Net Weight: 78.7 kg / 174 lbs...
  • Page 14 (1) To position the footpad wheel in the proper position. For ease of folding, position right or left footpad wheel located in the Ideal Folding Area (see below picture 1). (2) Rotate the pedal arm and place footpad wheel like picture 2 or picture 3. ANDES 5 (3) To grip the handle (picture 4). ANDES 7i (4) Pull up until guide rail set locks onto place.
  • Page 15 UNFOLDING INSTRUCTION FOLD DOWN INSTRUCTION (1) To grip the handle, push forward gently. (2) Pull up on the handle to release. (3) Pull back to fold down. ANDES 5 ANDES 7i HANDlE...
  • Page 16 MOVING The eLLIPTICaL WaRNING! Our ellipticals are heavy, use care and additional help if necessary when moving. Failure to follow instructions could result in injury.
  • Page 17 ELLIPTICAL OPERATION This section explains how to use your elliptical’s console and programming. The BASIC OPERATION section in the ELLIPTICAL gUIdE has instructions for the following: • lOCATION Of THE EllIpTICAl • pOWER/GROUNDING INSTRUCTIONS • fOOT pOSITIONING • MOVING THE EllIpTICAl •...
  • Page 18 ANDES 5 Energy Saver Energiespar- modus...
  • Page 19 ANDES 5 CONSOlE OpERATION Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed before use. A) lCD DISplAy WINDOWS: Time, distance, Speed, RPM, Resistance Level, Heart Rate, Calories, Watts, HR Wheel, Resistance Profile, Passport Connection.
  • Page 20 ANDES 7i Energy Saver Energiespar- modus...
  • Page 21 ANDES 7 CONSOlE OpERATION Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed before use. A) lCD DISplAy WINDOWS: Time, distance, Speed, RPM, Resistance Level, Heart Rate, Calories, Watts, HR Wheel, Resistance Profile, Passport Connection.
  • Page 22 ANDES 5 ANDES 5 DISplAy WINDOWS • TIME: Shown as minutes : seconds. View the time rate. The Change display button switches between your remaining or the time elapsed in your workout. MAXIMUM HEART RATE and your current HEART RATE.
  • Page 23 ANDES 7i ANDES 7 DISplAy WINDOWS • TIME: Shown as minutes : seconds. View the time • HEART RATE WHEEl: displays your current activity zone remaining or the time elapsed in your workout. during your workout. With this Heart rate wheel you can be certain if your exercise level fits your workot goal.

  • Page 24: Getting Started

    GETTING STARTED TO ClEAR SElECTION/RESET THE CONSOlE QUICk START Hold START/STOP for 3 seconds. 1) Make sure the power is on. 2) Press START / STOP to start exercise in MANUAL fINISHING yOUR WORkOUT mode. When your workout is complete, the bike will stop 3) Press to adjust resistance level during the workout.
  • Page 25 INfORMATION Andes 5:10 programs (Manual, Intervals, game, Weight Loss, Rolling, Reverse Train, Random, Constant Watts, THR Zone, Custom ) Andes 7i:14 programs (Manual, Intervals, game, Fit Test, Weight Loss, Weight Loss Plus, Rolling, Reverse Train, Constant Watts, Interval Watts, THR Zone, %THR, Strength Builder, Custom ) 1) MANUAl: Allows you to adjust the resistance level to your preference, without a preset program.
  • Page 26 INTeRVaLS Warm Up Program Segments - Repeat Cool down Seconds Level ( Andes 7i ) 3) GAME: This warm up game simulates a Car Racing game. To control the car up and down, you pedal faster or slower. Try to avoid those barriers and keep on track. Your remaining chances will be shown on upper LCd with 10 dots and each time you hit a barrier one dot will be removed.
  • Page 27 Time based program with 16 levels to choose from. User sets time and level using (up/down arrows) and ENTER. Please drink enough water while and after doing exercise to enhance the weight loss results. WeIGhT LOSS Warm Up Program Segments - Repeat Cool down Seconds Level ( Andes 5 )
  • Page 28 WeIGhT LOSS Warm Up Program Segments - Repeat Cool down Seconds Level ( Andes 7i ) 6) WEIGHT lOSS plUS (ANDES 7i ONly): Promotes weight loss by increasing and decreasing the resistance, while keeping you in your fat burning zone. Time based program with 15 levels to choose from and greater intensity than the weight loss program.
  • Page 29 7) ROllING: Maintains weight by gradually raising and lowering the resistance level to gradually raise and lower your heart rate. Rolling Warm up Program Segments - Repeat Cool down Seconds Level ( Andes 5 ) Rolling Warm up Program Segments - Repeat Cool down Seconds Level ( Andes 7i )
  • Page 30 Forward (F), or Reverse (R) to help you reach your fitness goal. Reverse Train Time Warm up Cool down Level ( Andes 5 ) Reverse Train Time Warm up Cool down Level ( Andes 7i )
  • Page 31 9) RANDOM (ANDES 5 ONly): Special designed chart based program that will simulate resistance being changed randomly. Random Warm up Program Segments Cool down Seconds Level 10) CONSTANT WATTS: This workout automatically adjusts the resistance to keep you within a set Watts range and maintains your desired level of exercise intensity.
  • Page 32 12) THR ZONE: Simulate the intensity of your favorite sport as the program resistance automatically adjusts to maintain a set Target Heart Rate range. (Suggest to use chest belt with this program. You may purchase chest belt separately from your dealer) 1) Select THR Zone program using and press ENTER.
  • Page 33 13) % THR (ANDES 7i ONly): Benefits weight loss by maintaining an optimum exercise level to burn fat, while adjusting the resistance to keep you in your target heart rate zone. First set up your personal data (your machine will automatically calculate your maximum workout heart rate) and select the percentage you wish to workout base on your maximum heart rate.
  • Page 34 15) CUSTOM: Customized workout, time defaults to 15 minutes. 1) First enter the program setting and profile display will guide you through all the workout column. 2) Use upper and lower arrow to change the resistance and press enter to confirm. Console will display your current segment number and guide you through segment 1 to segment 15.
  • Page 35 USING yOUR MEDIA plAyER 1) Connect the included AUdIO AdAPTOR CABLE to the AUdIO IN JACK on the console and the headphone jack on your media player. 2) Use your media player buttons to adjust song settings. 3) Remove the AUdIO AdAPTOR CABLE when not in use. SyNCING WITH pASSpORT 1) Using the arrow key on the passport remote control to scroll to the setup icon and press the Select.
  • Page 36 ANDES 5 EXplODED VIEW J04x2 P05x4 B38x4 B37x4 Q05x2 Q05x6 S03x4 Q06x3 P07x3 Q04x2 J08 J09 B36x2 B26x2 B43x2 B45x2...
  • Page 37 ANDES 5 pARTS lIST dESCRIPTION dESCRIPTION BEARINg;dRY;PAP 2015;SHUN dE;SHUN dE LINK ARM SET;SEMI-ASSY;LEFT;S-EP580; AdJUSTABLE LEVELER LINK ARM SET;SEMI-ASSY;RIgHT;S-EP580; TRANSPORTS WHEEL ;PC;BLACK;FC16; CRANK SET;WELdINg;EP543-1US; PULL PIN;EP247 COVER;CRANK;HIPS;Q520-7-3;EP580-2KM; CLIP CC S-12 EXTERNAL SCREW;SH;M10x60L-22L;HS;BED;G12.9; SPRING;CMP;Φ1.2xΦ14.5x17.0Lx8.5N;SWP;WZN NUT;M10X1.5P;g10;BLACK ANNOdIZEd; AIR STICK;SLOW-dROP;75Kg;MAX(331)MIN(213 WASHER;FLAT;Φx10.2xΦx15.0x1.5T;BL ZN;R COVER;STABILIZER TUBE;FRONT;HIPS,PH-88;...
  • Page 38 dESCRIPTION dESCRIPTION CABLE TIE;NYLON;BLACK;160L WASHER;SPRING LOCK;Φx8.2xΦx15.4x2.0T;BL CABLE TIE;NYLON;300L;WHITE WASHER;FLAT;Φx8.6xΦx26.0x2.0T;BL ZN;RO PLATE POWER SOCKET WASHER;FLAT;Φx8.2xΦx20.0x1.5T;BL ZN;RO SCREW;BUTTON HEAD;Φ4x10L;SHEET METAL THR WASHER;FLT;Φ16.0xΦ25.0x1.5T; ECB SET;INTERNAL;ERP 0.5W; SCREW;BH;M8X20L;HS;BZN;BP;g8.8; STEEL ROPE;ECB; 160L;L1+L2=65 RING;RUBBER;Ψ26.2xΨ16.20x11.50 SCREW;BH;Φ4x12L;TC;PH;BAN;POT WRENCH;HEX L-TYPE;5MM 52X140L;BLACK OX dRIVE SET;SEMI-ASSY;S-EP580; WRENCHOPEN-TYPE#13#15**dISC USE 005382-Z KEY;ROUND;DUAL-END;6x6x14L; AdAPTER;EUROPE;100-240V/50HZ;12V/2A;HOR SNAP RINg;EXTERNAL;CST;BAN;S-25;...
  • Page 39 ANDES 7 EXplODED VIEW R12 R09 J04x2 P05x4 B38x4 P09x2 B37x4 Q06x2 Q06x6 P09x2 Q07x3 P07x3 Q05x2 B36x2 J08 J09 B26x2 Z07 Z06 B43x2 B45x2...
  • Page 40 ANDES 7 pARTS lIST dESCRIPTION dESCRIPTION AIR STICK;SLOW-dROP;75Kg;MAX(331)MIN(213 ARM REST SET;SEMI-ASSY;RIgHT UP;S-EP581 SCREW;BH;Φ4x15L;SM;PH;BZN;POT COVER;HANd ARM;ABS/PA757K;Q520-7-3;EP580 SCREW;BH;M8X1.25PX30L;HS;CRMO; LINK ARM SET;SEMI-ASSY;LEFT;S-EP581; NUT;NLK;M8X1.25P;BZN; LINK ARM SET;SEMI-ASSY;RIgHT;S-EP581; WASHER;FLAT;Φx8.2xΦx20.0x1.5T;BL ZN;RO CRANK SET;WELdINg;EP543-1US; COVER;STABILIZER TUBE;FRONT;HIPS,PH-88; COVER;CRANK;HIPS;Q520-7-3;EP580-2KM; COVER;STABILIZER TUBE;MId;HIPS,PH-88;E SCREW;SH;M10x60L-22L;HS;BED;G12.9; TRANSPORTS WHEEL ;PC;BLACK;FC16; NUT;M10X1.5P;g10;BLACK ANNOdIZEd; AdJUSTABLE LEVELER WASHER;FLAT;Φx10.2xΦx15.0x1.5T;BL ZN;R BEARINg;dRY;PAP 2015;SHUN dE;SHUN dE SCREW;BH;M5X0.8PX8L;CT;PH;BZN;...
  • Page 41 dESCRIPTION dESCRIPTION SCREW;BUTTON HEAD;Φ4x10L;SHEET METAL THR SCREW;SH;M10X1.5PX20L;HS;BZN; SCREW;BH;Φ4x10L;TC;PH;BAN;POT WRENCH;HEX;L-TYPE;#8MMX147L; CABLE TIE;NYLON;300L;WHITE SCREW;BH;M8X70L-12L;HS;g8.8;BZN;BP; CONSOLE WIRE;UP1;280MM;CKM254301-8P NUT;NLK;M8X1.25P;BZN; WIRE;SENSOR;700MM;CYLINdRICAL MAgNETI WASHER;SPRING LOCK;Φx8.2xΦx15.4x2.0T;BL OVERCURRENT BREAKER;3A;125V/250V;CITY B WASHER;FLAT;Φx8.6xΦx26.0x2.0T;BL ZN;RO WIRE;POWER SOCKET SET;150 150 300;250 WASHER;FLAT;Φx8.2xΦx20.0x1.5T;BL ZN;RO WIRE;ELECTROMAgNET PWR;400MM;EL-2Y VH WASHER;FLT;Φ16.0xΦ25.0x1.5T; FILTER;POWER;3A;220V;BF1106C-3A-02;ERP SCREW;BH;M8X20L;HS;BZN;BP;g8.8; WIRE;CTRL BOARd PWR;BLACK;250LOCK700L RING;RUBBER;Ψ26.2xΨ16.20x11.50 WIRE;CTRL BOARd PWR;WHITE;250LOCK700L WRENCH;HEX L-TYPE;5MM 52X140L;BLACK OX...
  • Page 42 dESCRIPTION WIRELESS RECEIVER SET...
  • Page 43 HORIZON Fitness - Produkte sind recyclebar. Führen Sie das gerät am Ende der Nutzungsdauer einer sachgerechten Entsorgung zu (örtliche Sammelstelle). Gb: Waste Disposal HORIZON Fitness products are recyclable. At the end if its useful life please dispose of this article correctly and safely (local refuse sites). f: Remarque relative à la gestion des dèchets HORIZON Fitness sont recyclables.
  • Page 44 ELLIPTICAL OWNER’S MANUAL Andes 5 & Andes 7i Owner’s Manual 073014’ Rev. 2.1 © 2014 Horizon Fitness...

This manual is also suitable for:

Andes 7i

Table of Contents