Horizon Fitness ELLIPTICAL RE7.6 Assembly & User's Manual page 14

AS S EM BLY S T E P 7
SCREW (L)
A) Open HARDWARE BAG FOR STEP 7.
B) Attach the OUTSIDE ELBOW COVER to elbow joint using 1 SCREW (K).
C) Snap the INSIDE ELBOW COVER onto the OUTSIDE ELBOW COVER.
Note the position of the snap tabs before snapping into position.
D) Repeat on other side.
E) Install WATER BOTTLE CAGE to console mast using 2 SCREWS (L).
HARDWARE BAG FOR STEP 7 CONTENTS :
1
WATER BOTTLE CAGE
SCREW (K) SCREW (L)
10 mm 15 mm
Qty: 2 Qty: 2
LOWER HANDLEBAR
INSIDE
ELBOW COVER
LOWER LINK ARM
OUTSIDE
ELBOW COVER
SCREW (K)