Horizon Fitness ELLIPTICAL RE7.6 Assembly & User's Manual page 10

A S SE MB LY ST E P 
USE LEFT HANDLEBARS
NOTE: There is NO hardware bag for this step. All hardware is pre-installed.
A) Remove PRE-ATTACHED BOLT & WASHERS from CONSOLE MAST.
B) Slide LOWER HANDLEBARS onto CONSOLE MAST and attach by re-inserting PRE-ATTACHED BOLT & WASHERS.
C) Slide UPPER HANDLEBARS onto LOWER HANDLEBARS and align NOTCH with TAB making sure handlebars are
joined together completely. Secure UPPER HANDLEBARS to LOWER HANDLEBARS using PRE-ATTACHED SET
SCREWS.
Reminder: The upper and lower handlebars are marked with an L if they are to be used on the left-hand side
of the elliptical or an R if they are to be used on the right-hand side of the elliptical. If the handlebars are
assembled on the incorrect side of the elliptical, the unit will not function correctly.
WARNING
10
CONSOLE MAST
After handlebars are assembled they will rotate freely – be cautious. Until the
machine is fully assembled, do not grab the handlebars for support.
UPPER HANDLEBAR
NOTCH
PRE-ATTACHED
SET SCREWS
TAB
PRE-ATTACHED
BOLT & WASHER
LOWER HANDLEBAR
USE RIGHT HANDLEBARS