Voltage Meter; Amp Meter; Frequency Meter - Shindaiwa DG1000MI Owner's And Operator's Manual

5.2.4 Fuel Gauge
5.2.5 Generator Gauges
5.2.5.1

Voltage Meter

5.2.5.2 Amp Meter

5.2.5.3 Frequency Meter

5.2.6 Lamp
5.2.6.1 Preheat Lamp
It shows the volume in the fuel tank. When filled up, it shows 『 F 』 .
When the hand is approaching to 『 E 』 , the volume is coming to empty.
Replenish fuel enough promptly.
Voltage Meter displays the output voltage (Phase to Phase) from the
generator.
Please check and confirm it showing 200V (400V) at 50Hz and 220V (440V)
at 60Hz during operation.
Amp Meter displays the electrical (Phase) current output from the generator.
Frequency meter will display the frequency of the generator.
Please check it showing 50Hz or 60Hz during operation.
When the start switch is turned to <Pre-heating> position, the Preheat
(Status) Lamp will be turned on in 25 seconds, indicating that the preheating
is completed.
- 13 -