Table of Contents
Advertisement
E.
Printing
the Self Test
Follow these steps to print the Self Test:
1.
Press the ON LINE key to set the printer off-line.
2.
Press the TEST/FONT key once. The printer displays the SELF TEST message followed by
the PRINTING TEST message.
3. When the Self Test is complete, press ON LINE to set the printer on-line.
NOTE: You can continuously print the Self Test. To do so, press and hold the TEST/FONT key
for more than six seconds. The printer displays the CONT. SELF TEST message. You
must turn elf the printer to stop the continuous SelfTest.
Use the Self Test to verify operator panel selections. system configurations (memory and
options], and print quality.
The elements of the self tesl are as follows:
***
Need final Self Test***
Standard Menu Selections: Shows standard menu selections, such as Printing Menu and
1.
PCL Menu. and menu options, such as copies and MP tray, in the order they appear in the
control panel display.
2.
RAM Size: Shows the total amount of installed printer memory, including added optional
memory. The LBP-860 comes with 2MB of installed memory. If you install optional memory,
you can use a self test to verify it is properly installed.
3.
Page Count: Shows how many pages have been prtnted. You can use the page count to
track printer use. The page count is always updated.
4.
Datecode: Eight-digit date indicating when the formatter firmware was last revised. This
information may be of use to a service technician.
5.
Other Installed Options: Lists any installed typeface cartridges, paper trays, personalities,
and other options.
Print Pattern: Provides a text print pattern so you can check print density and quality.
6.
l - 2 6
Advertisement
Table of Contents
